What Goes on a Spring Maintenance Checklist for Rental Property?
Spring is for finding what winter broke. Then you get the home ready for heat and rain.
Here is what this list covers in spring:
- Test the smoke alarms and carbon monoxide alarms.
- Have a pro check the AC before it gets hot.
- Change the air filter.
- Clean the gutters. Check the downspouts.
- Look at the roof for lost shingles.
- Check the caulk on windows and doors.
- Turn on the sprinklers and outside taps. Look for leaks.
- Flush the water heater.
- Check the basement for water.
- Check decks, steps and rails.
Not every home has all of these. So the tool lets you untick what you don't have.
What Goes on a Fall Rental Maintenance Checklist?
Fall is for getting ready for cold. Keep heat in. Keep water from freezing. Keep fire out.
- Test the smoke alarms. Put new batteries in the carbon monoxide alarms.
- Have a pro check the heat before it gets cold.
- Change the air filter.
- Clean the dryer vent pipe.
- Have the chimney cleaned and checked, if you have one.
- Clean the gutters after the leaves drop.
- Seal gaps by doors and windows.
- Shut off and drain the outside taps and sprinklers.
- Wrap pipes in cold spots.
- Check the lights on paths and steps.
Why Do Spring and Fall Checks Matter So Much?
Small problems get big when you wait. A spring check finds them while they are still small.
A clogged gutter is a ten-minute job. Water in the wall from that gutter is not.
A dry, cracked bead of caulk costs a few bucks. Rot under the window costs a lot more.
And a tenant who sees you fix things in spring knows you care. They report the next leak sooner. That is what you want. Log each job in our repair log.
How Often Should You Do Each Job?
Some jobs have a source you can name. Some are just a rule of thumb. This list tells you which is which, right next to each job.
We checked these sources on Nov 16, 2026:
- Smoke alarms. The NFPA (a fire safety group) says to test them once a month. Swap each one 10 years after the date it was made.
- carbon monoxide alarms. The CPSC (the U.S. product safety group) says to test them each month. Put in new batteries once a year.
- Heat and AC. ENERGY STAR says to have the cooling checked in spring and the heat checked in fall. Check the air filter each month.
- Dryer vent. The NFPA says to clean the lint out of the vent pipe once a year. Do it sooner if clothes take longer to dry.
- Chimney. The NFPA says to have a pro clean and check it once a year.
The rest are rules of thumb. Like gutters twice a year, or flushing the water heater once a year. They are common advice, not a law. Your weather, your trees and your water change the right answer. Always read the maker's manual first.
Why Is the Dryer Vent on the Fall List?
Lint burns. And it builds up where you can't see it, inside the vent pipe.
The U.S. Fire Administration says not cleaning the dryer is the top cause of home dryer fires. It also says these fires peak in the winter months. (Checked Nov 16, 2026.)
So clean the vent pipe in fall, before the busy months. And ask tenants to clean the lint screen after every load. That line is on the tenant page.
What Should Your Tenant Do Each Season?
A few easy things. Test the alarms. Clean the lint screen. Tell you about leaks fast.
That is why the tool adds a short tenant page. It prints on its own sheet. Hand it over or tape it by the door.
It asks the tenant to:
- Push the test button on each alarm once a month.
- Tell you right away if an alarm chirps.
- Clean the dryer lint screen after every load.
- Tell you about leaks and wet spots, even small ones.
- In fall, take the hose off the outside tap.
- Tell you if the heat or AC does not work.
It also says: smell gas, see smoke, or hear the carbon monoxide alarm? Get out. Call 911. Your name and phone print at the bottom.
New tenant? Hand this page over with a tenant welcome letter. The letter says how to report a repair.
How Do You Use This Checklist?
Pick a season. Cut what you don't need. Print. Tick as you go.
- Pick spring, fall or both at the top.
- Type the address, your name and your phone.
- Open "Pick the jobs that fit your rental." Untick what you don't have, like sprinklers or a fireplace.
- Add your own jobs. Like "Power wash the deck."
- Print it, or download the PDF.
- Tick each job and write the date when it is done.
- Keep the page in that home's folder.
You can tick jobs on screen too. Then print. The ticks print with it.
What Mistakes Should You Skip?
- Waiting for the rush. Heat and AC pros get busy at the start of summer and winter. Book early.
- No dates. A tick with no date tells you nothing next year. Write the date.
- Going in with no notice. Many jobs are inside. Tell the tenant first. Notice rules differ by state.
- Doing gas or wire work yourself. Call a pro for heat, gas and electric work.
- One list for every home. A condo with no yard does not need the sprinkler job. Cut it.
What Does a Done Spring List Look Like?
Here is a made-up example for one small home.
- Smoke alarms tested. One was 11 years old. Swapped. April 6.
- carbon monoxide alarm tested. April 6.
- AC checked by a pro. April 14.
- Gutters cleaned. One downspout fixed. April 20.
- Sprinklers: unticked. This home has none.
Next spring, you know what was done and when. And which alarm is new. Want dates on your phone? Try our maintenance schedule.